Need help?Do you have a question about the Mynt3d Basic and is the answer not in the manual?
Material Specifications| print material | ABS/PLA |
|---|---|
| material diameter | 1.75mm |
| material temperature | ABS 210°C, PLA 190°C |
Nozzle Specifications| nozzle diameter | 0.7mm |
|---|---|
| nozzle temperature | 130-240°C |
Power| power input | 5V 2A |
|---|---|
| power output | 10W |
Weight and Dimensions| equipment dimension | 150mm x 38mm x 23mm |
|---|---|
| equipment weight | 50g |
Warning about the hot nozzle and filament, and handling precautions.
Warning against using the appliance near bathtubs or other water vessels.
Instructions for responsible product disposal and recycling to protect the environment.
List of items to check for in the package upon receipt.
Overview of the 3D printing pen's physical components, buttons, and indicators.
Steps to connect the power source and initiate the pen's heating process.
How to switch between ABS and PLA filament modes using the pen's button.
Guide on inserting and loading filament into the pen after heating.
Instructions for controlling print speed and starting a drawing on a surface.
How the pen behaves during inactivity and automatic retraction of filament.
Procedure for unloading filament and loading new colors correctly.
How to exit continuous feed mode using the load or withdraw buttons.
Requirements for using the pen with power banks, specifying amperage.
Explanation of post-release extrusion and potential temperature adjustments.
Advice on filament deformation, quality, and storage in dry locations.
Steps to take if the nozzle becomes clogged, including contact information.
Information on potential smoke emission when changing from PLA to ABS filament.
Detailed technical specifications of the 3D printing pen, including dimensions and materials.
Details about the product's one-year limited warranty covering manufacturing defects.
Information for reaching customer support, including address, email, and phone number.
To Next Page
