Need help?Do you have a question about the Mynt3d Junior2 and is the answer not in the manual?
General| Print Technology | Fused Deposition Modeling (FDM) |
|---|---|
| Layer Resolution | 100 - 300 microns |
| Nozzle Diameter | 0.4 mm |
| Filament Diameter | 1.75 mm |
| Connectivity | USB, SD card |
| Display | LCD screen |
| Weight | 2.8 kg (6.2 lbs) |
| Build Volume | 120 x 120 x 120 mm |
| Supported Materials | PLA, ABS, TPU, PETG |
| Power Supply | 100-240V, 50/60Hz |
To Next Page