EasyManua.ls Logo

MyPurMist Free User Manual

MyPurMist Free
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Quick start guide
First add Mypurmist water at the fill port in the
back. Twist the top o the water refill and insert
spout into the water fill port with the refill label
facing you. Squeeze repeatedly until empty. Do not
over fill - stop if water spills at fill port.
With water added, charge Mypurmist until
charge indicator light is green. Unplug charger.
The device will not operate while plugged in.
Typical charge time is 1.5-2 hours.
Press ON and get instant ultrapure steam
therapy for superb relief! Anywhere, anytime.
Adjust steam temperature to your comfort by
pressing the temperature control button.
1.
2.
3.
4.
Helpful hints
Attach included Mypurmist scentpad at the air intake.
Press one reservoir to add soothing
eucalyptus and peppermint aroma. Enjoy!
Device goes into automatic drying mode for 10 min
for self cleaning when turned OFF or when it runs out
of water or battery. No maintenance needed.
Mypurmist Free is great for the whole family. Use
Mypurmist as often as needed. Typical use is two
sessions per day for 15 minutes each.
Mypurmist Free also works as an air purifier without
making steam. Toggle the temperature control to
white light only for cool purified air.
A steady red light in the water window on the rear
side means it is out of water. See user manual.
See Mypurmist.com or consult the User Manual for
additional information.
mypurmist.com
No power Charging Ready
HEPA
air-purifier ON
ON/OFF button
and battery
level indicator
Temperature
control
(100°-115°F)
Charge indicator light
ChargingCharging
First add Mypurmist water.
Then charge device
for approx. 1.5-2 hours
Question and Answer IconNeed help?

Do you have a question about the MyPurMist Free and is the answer not in the manual?

MyPurMist Free Specifications

General IconGeneral
Power SourceRechargeable Battery
Water TypeDistilled Water
TypeHandheld Steam Inhaler
Steam TemperatureApproximately 43°C (109°F)
Run TimeApproximately 25-30 minutes per charge
Charging Time90 minutes

Summary

Quick Start Guide to Mypurmist Operation

Adding Water to the Device

Fill the device with Mypurmist water at the fill port in the back using the refill spout until empty.

Charging the Mypurmist Device

Charge the Mypurmist until the indicator light is green. Charging takes approximately 1.5-2 hours.

Operating for Steam Therapy

Press ON to get instant ultrapure steam therapy for relief. Device does not operate while plugged in.

Adjusting Steam Temperature

Customize steam comfort by pressing the temperature control button.

Helpful Hints and Features

Using Scentpads

Attach scentpads at the air intake for soothing aromas like eucalyptus and peppermint.

Automatic Drying Mode

Device self-cleans for 10 min when OFF or out of water/battery; no maintenance needed.

Mypurmist Free Usage & Air Purifier

Suitable for family use; can also purify air with white light only for cool purified air.

Water Level Indicator

A steady red light in the rear water window indicates the device is out of water.

Warranty and Registration

Upgrade to Two-Year Warranty

Register your Mypurmist Free device to upgrade to a two-year warranty.

Free Lifetime Warranty Offer

Obtain a FREE Lifetime Warranty by signing up for a water plan today.

Related product manuals