MyQ Smart Garage User Manual

INSTALL
• Remove the pull tab from the sensor to
activate the battery.
• Install the door sensor on the top panel
of the garage door using the fastening
strips or provided hardware.
Door Sensor
OR
Screws
CR2450 Battery
LED
Test
BUTTON
“TOP” MUST
always face UP
Fastening
Strips
2. Install the Door Sensor
TIP: Test your door sensor every 6 months or
if the MyQ system is not working as expected.
• Press the test BUTTON on the door
sensor, the LED on the door sensor should
fl ash and the Wi-Fi Hub should beep.
• Perform this test 6 times. If the LED
doesn’t fl ash or the Wi-Fi Hub doesn’t
beep each time, replace the battery in the
door sensor with a CR2450 battery.

MyQ Smart Garage Specifications

General

Compatibility	Most Garage Door Openers
Connectivity Technology	Wi-Fi
Control Method	App, Voice
Security	Encryption
Voice Control	Amazon Alexa, Google Assistant
Notifications	Real-time alerts