EasyManua.ls Logo

mysoda WOODY - User Manual

mysoda WOODY
89 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
1
Sparkling
water
maker
Machine
à
Eau
Petillante
Wassersprudler
Hiilihapotuslaite
EN
FR
DE
NL
IT
FI
SE
DK
NO
PL
Instruction
WOODY

Questions and Answers

  • P
    phyllistownsendJul 27, 2025
    Why is my mysoda Kitchen Appliances water not bubbly enough?
    • E
      Elizabeth TaylorJul 27, 2025
      There are several reasons why your water might not be carbonated enough. It could be that the CO2 cylinder is running low, in which case you should replace it with a new one. Another reason could be that the water is too warm; ensure you are using the coldest water possible, as CO2 dissolves better in cold water. Lastly, the CO2 cylinder may not be screwed in tight enough, so make sure to screw it in securely into the device.
  • T
    turneranthonyJul 31, 2025
    What to do if CO2 cylinder leaks after installation in mysoda Kitchen Appliances?
    • M
      Ms. Nicole SantosJul 31, 2025
      If your CO2 cylinder leaks after installation, remove the CO2 cylinder and reattach it securely by hand. Do not use tools and do not overtighten.
  • A
    Amber MaxwellAug 4, 2025
    What to do if water bottle overflows during carbonation with mysoda Kitchen Appliances?
    • N
      Nathan SilvaAug 4, 2025
      If the water bottle overflows during carbonation, it could be due to overfilling the bottle. Make sure to fill the bottle with water up to the fill line indicating the maximum level. Also, avoid pressing the carbonating button for longer than 1–2 seconds at a time.
  • G
    Grace LawrenceAug 9, 2025
    How to release water bottle from the quick lock of mysoda Kitchen Appliances?
    • R
      Rachel OnealAug 9, 2025
      To release the water bottle from the quick lock, gently pull the water bottle towards yourself until it reaches its fully forward tilt position. Then, release the bottle by turning it one quarter clockwise.
  • S
    ssimsAug 13, 2025
    How to attach water bottle to the quick lock of mysoda Kitchen Appliances?
    • B
      Brian BellAug 13, 2025
      To attach the water bottle to the quick lock, pull the quick lock and nozzle towards yourself. Then, attach the bottle by turning it one quarter anti-clockwise.
  • K
    Kelly MillerAug 18, 2025
    Why does my mysoda Kitchen Appliances device make a whistling noise during carbonation?
    • Q
      qmurphyAug 18, 2025
      The whistling noise during carbonation is normal and will stop once the carbonation process is complete.
  • V
    Valerie HansenAug 22, 2025
    Why do small, white ice particles form around the nozzle during the carbonation of mysoda Kitchen Appliances?
    • C
      Cynthia WilliamsAug 22, 2025
      The formation of small, white ice particles around the nozzle during carbonation is normal, especially when the water is cold.

Summary

Important Safeguards

Device Operation Warnings

Safety precautions for using the sparkling water maker, including age restrictions, proper placement, and avoiding modifications.

CO2 Cylinder Handling Safety

Guidelines for inspecting, storing, and safely handling CO2 cylinders to prevent damage or leaks.

Water Bottle Safety Precautions

Instructions for safe storage and cleaning of water bottles, prohibiting use in freezers or dishwashers.

CO2 Cylinder Hazard Information

Detailed warnings on food safety, pressure, explosion, and frostbite risks associated with CO2 cylinder usage.

Sparkling Water Maker Components and Procedures

Device and Component Identification

Visual guide to parts of the sparkling water maker, CO2 cylinder, and water bottle.

CO2 Cylinder Installation and Replacement

Procedural steps for inserting and changing the CO2 cylinder in the sparkling water maker.

How to Make Sparkling Water

Device Care, Cleaning, and Usage Tips

Cleaning Procedures

Guidance on cleaning the sparkling water maker and water bottle using mild methods.

CO2 Cylinder and Usage Advice

Information on CO2 cylinder refills and general tips for optimal device use and enjoyment.

Technical Specifications

Product Warranty Information

Troubleshooting Guide

mysoda WOODY Specifications

General IconGeneral
Product colorStainless steel, White
Housing materialComposite
Carbonating bottle volume1 L
Carbonating bottle includedYes
Carbonator charger includedNo
Country of originChina
Weight and Dimensions IconWeight and Dimensions
Depth130 mm
Width245 mm
Height408 mm

Related product manuals