11
Sealed Electric Wall & Floor Mounted Towel Warmers
7.0 Operating Instructions
G The unit can be left on constantly if desired, without
detrimental effect.
G The unit can be switched on or off using the control switch
on the unit or using optional programmable timer.
G The temperature of the unit may vary during operation.
Fabrics that contain soap, laundry detergent,
liquid fabric softener or bath oil residue may
show what appears to be scorch marks. This is
simply discoloration due to the residue. The
towel warmer does not reach sufficient temperature to scorch
fabric. We are not responsible for fabric discoloration due to
laundry detergent, softener or bath oil. As a precaution we
recommend you place a towel directly onto the rail before
placing items of clothing.
!
IMPORTANT
8.0 Maintenance
Cleaning: The finish of your MYSON towel
warmer can be protected and maintained by an
occasional wiping with a soft, non-abrasive,
damp cloth then lightly polishing with a soft dry
cloth when the towel warmer is cold. Under no circumstances
should abrasive cleaning powders, metal polish or chlorine
based cleaners be used on any part of this product.
This product is filled with a precise quantity of
liquid. Any leakage from the product, and any
repairs that involve opening the product must
be dealt with by the manufacturer or its
representative.
G If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent, or a similarly qualified person
in order to avoid a hazard.
G The liquid in this product is not affected by temperatures
below 0°F.
G Please contact your supplier in the event of any problems or
if repair is needed.
!
IMPORTANT
!
CAUTION
8.0
7.0
6.0
23416 Towel Warmer US:Layout 1 25/11/10 15:19 Page 12
To Next Page
Loading...