Mounting for ECOS:
G Secure inner bracket to rail in the positions shown in
Technical Data (Section 6) using clamp and screw.
G Place the product in the desired location and mark the
position of the inner fixing brackets.
G Drill holes such that the inner brackets line up with the
location of the outer brackets.
G Fix inner brackets firmly to wall.
G Slide outer brackets onto inner brackets and lock with grub
screw. DO NOT FORCE - adjust wall bracket position to
ensure smooth fitting if necessary.
4.0 Fixing (cont)
Mounting for EGAV:
Decide on the location for the towel warmer and then follow the
fitting instructions below.
Mounting for ECAV:
G Decide on the location for the towel warmer and mark the
position of the wall brackets.
G Drill holes for the wall bracket and fix securely.
G Slide middle bracket into the towel warmer bracket and lock
in place using the fixing screw.
G Slide towel warmer onto wall bracket. DO NOT FORCE -
adjust wall bracket position to ensure smooth fitting.
G Tighten the grub screws.
04
Sealed Electric Wall & Floor Mounted Towel Warmers
23416 Towel Warmer US:Layout 1 25/11/10 15:18 Page 5
To Next Page
Loading...