Your MZ-3 picks up electrical signals generated by the contractions of your
heart. To be effective, your MZ-3 belt must be worn under your clothing to
make proper contact with your skin. To wear it, place the module in the
center of your chest on top of your sternum with the logo facing out. The
MZ-3 should fit snugly but comfortably around your chest.
You adjust the strap size using the plastic adjusters. To shorten it, use both
hands to pull the adjusters apart. To lengthen it, hold one end in one hand
and use your other hand to pull the upper adjuster downwards.
MYZONE® FACILITY?
If you are live streaming your session to the MYZONE® App, your data is
regularly uploading to your account. If you workout without live streaming
to the App, your belt will store the data until you open your Effort Stream
while wearing your belt, or until you stand within range of the MYZONE®
reciever at your facility. You will see an updated date and time at the
bottom of the Effort Stream page upon successful upload. Keep in mind
that your belt has 14 to 16 hours of stored data capacity.
Q: HOW DO I KNOW MY BELT IS WORKING?
The belt will beep one time when the belt is activated and 3 times when
you take it off.
USING YOUR
MZ-3
NEED A REAL TIME IMAGE
MZ-3
To Next Page
Loading...