5.2. When in charge stage, set constant current (CC): 25A; Constant voltage (CV): 52.5V,
termination current: 2.5A, charge the battery pack, then let rest 15 minutes.
5.3. When in discharge state, set constant current (CC): 25A; discharge the battery pack
with the termination voltage set to 34.5V, then let rest 15 minutes. NOTE: SOC 30% is
approximately 48.5VDC.
5.4. To recharge to 80%SOC, set constant current (CC): 50A; Constant voltage (CV): 52.5V,
termination current: 5A. Charge time to 80% SOC for N1C.L4850EBM2U: approx. 95
minutes. Charge time to 80% SOC for N1C.L48100EBM3U: approx. 190 minutes.
To Previous Page
Loading...
