Preparation for Work
The carpet cleaning machine AVB4X is designed to clean both large areas of carpet and hard floor. It
is also possible to clean upholstery, inside of cars or hard-to-reach areas, by using additional
accessories, which must be connected to the machine with connecting hoses (see paragraph
Use
with Accessories).
The following steps explain the necessary operations to prepare the machine for use:
1. Put the machine in the normal working position and regulate the height of the handle.
2.
Fill in the lower tank (solution tank) with cold or warm water, through the filling hole, add a de-
foaming detergent.
While filling the lower tank, pay attention to avoid overfilling the tank and to prevent water from
spilling. Always keep in mind the dangers connected of spilling water on electrical components.
3. Close the filling hose with the cap.
4
To Next Page
Loading...
