How to register the image file
For this setting operation,
is necessary as the operator level.
Change the operator level using the
Shortcut command R314 in advance.
(The initial parameter is “12345”)
o register an image for this
function, please follow this setting procedures.
Open <Constant Setting> - [38 User
Press Left cursor key to select
Using up/down cursor keys to select the registration number and then press
(In this example, 1 is selected)
The cursor will move to the right side of the screen. Select the desired image file
using cursor key and press [E
In this example, an image file
: external USB memory device) is selected. Please be sure that the file name
extension is not displayed in this
Now an image file “ZEROING123” is registered to the user help number 1.
>>The setting is saved in
(NOTE) To release the registered image file, use <DELETE> key.
To Next Page
Loading...