Nachi EZ-CFDL Series - Page 49

3.20 User help function
3.20.4
How to display the user help image
T
o display the user help image,
it is necessary to assign the user help
function to the software-key in advance.
“USER HELP” software-key (CODE is 2520)
In this case,
as an example, let’s
assign the software-key in the Teach mode.
(However
, the
User Help software-key can be assigned both
for the Teach mode and the
Playback mode)
Operating procedure
1
Press <f Key Entry> in the <Constant Setting> - [38 User Help] screen.
2
Input “2520” for the f1 key and press [Enter]. Then press <Complete>.
>>The setting is saved in
the internal memory
.
3
The “USER HELP” software-key is displayed as the f1-key in the Teach mode
screen.