Need help?Do you have a question about the NAD 2200PE and is the answer not in the manual?
Sets DC output voltage at speaker terminals to 0 ±5 mV.
Sets idling current to 7.5 ±0.5 mV at specified test points.
Comprehensive list of capacitors used, including part numbers and specifications.
Comprehensive list of resistors used, including part numbers and specifications.
Sets DC output voltage at speaker terminals to 0 ±5 mV.
Sets idling current to 7.5 ±0.5 mV at specified test points.
Comprehensive list of capacitors used, including part numbers and specifications.
Comprehensive list of resistors used, including part numbers and specifications.
General| Total Harmonic Distortion (THD) | 0.03% |
|---|---|
| Input Sensitivity | 1.1V |
| Gain | 29 dB |
| Power Output | 100W per channel into 8Ω |
| Frequency Response | 20Hz - 20kHz (±0.3dB) |
To Next Page
