What to do if there is no picture from my NAD T585?
If there's no picture on your TV when using the NAD DVD Player, first ensure that your TV is set to the correct video input mode to receive the DVD signal. Also, check that the video cable is securely connected to both the DVD player and the TV. Finally, verify that the unit output setting and TV resolution capabilities match, considering the mode of connection (e.g., S-Video, Component).
Why is there no sound from my NAD DVD Player?
If you're not getting any sound from your NAD DVD Player, first, make sure that the equipment connected with the audio cable is set to receive the DVD signal output by selecting the correct input mode on your audio receiver. Ensure that the connected equipment is powered on. Also, verify that the AUDIO output settings are correctly configured in the Audio Setup menu.
How to fix NAD T585 DVD Player remote control not working?
If the remote control isn't working with your NAD DVD Player, start by pointing the remote directly at the remote sensor on the DVD player. Ensure you are close enough to the DVD player while operating the remote. If it still doesn't work, replace the remote control batteries.
What to do if NAD DVD Player does not start playback?
If your NAD DVD Player won't start playback, first ensure that you've inserted a playable disc, checking the disc type, color system, and regional code. If the disc is compatible, check if the rating level is set and, if so, cancel the rating function or change the rating level.
How to turn on NAD T585 when there is no power?
If your NAD DVD player has no power, plug the power cord into the wall outlet securely.
General| Brand | NAD |
|---|---|
| Model | T585 |
| Category | DVD Player |
| Language | English |
To Next Page
