To Next PageTo Next Page
Need help?Do you have a question about the nader NDM2 Series and is the answer not in the manual?
Specifies the required insulation distances when mounting in a metal cabinet.
Defines the minimum center-to-center spacing for breakers installed side-by-side.
Specifies the minimum distance between vertically stacked circuit breakers.
Describes the procedure for performing insulation tests before installation.
Details how to install the circuit breaker in vertical or horizontal orientation.
Explains the function and wiring of the undervoltage release accessory.
Describes the function and wiring of the shunt release accessory.
Details the connection and status indication for auxiliary and alarm contacts.
Explains the operation and wiring of the motor-operated mechanism.
Provides instructions for installing and operating the manual mechanism.
Lists essential checks and preparations before operating the breaker.
Outlines the procedure for conducting a pilot run to test the breaker.
Details the schedule and procedures for breaker maintenance.
Highlights important precautions to be taken during installation.
Emphasizes crucial precautions to follow during breaker operation.
General| Rated Impulse Withstand Voltage (Uimp) | 4kV |
|---|---|
| Breaking Capacity (Icu) | 6kA |
| Breaking Capacity (Ics) | 6kA |
| Trip Unit Type | Thermal-Magnetic |
| Breaking Capacity | 6kA |
| Rated Current (In) | 16A, 20A, 25A, 32A, 40A, 50A, 63A |
| Poles | 1P, 2P, 3P, 4P |
| Rated Voltage (Ue) | 230/400V AC |
| Rated Insulation Voltage (Ui) | 500V |
| Standard | IEC/EN 60898-1 |
| Mounting | DIN Rail |
| Trip Characteristic | C curve |
