To Next PageTo Next Page
Need help?Do you have a question about the nader NDZ3X-100B/Z and is the answer not in the manual?
Shows wiring diagrams and identifies auxiliary contacts by color and polarity.
Description for Group A main contacts.
Description for Group B main contacts.
Description for the coil driver.
Descriptions for Group A and B auxiliary contacts.
Details about screw mounting.
Specifies vertical installation direction.
Installation requirements based on specified conditions and environment.
Replace product if contact insulation resistance is below 50MΩ.
Coil drive circuit power must be greater than coil starting power.
Prohibits use in strong magnetic fields or near thermal radiation.
Torque ranges for load end and product fixed installation screws.
Avoid grease on terminals and use specified conductors to prevent heating.
General| Model | NDZ3X-100B/Z |
|---|---|
| Rated Current | 100A |
| Number of Poles | 3P |
| Breaking Capacity | 10kA |
| Mounting Type | DIN Rail |
| Category | Circuit breakers |
| Rated Voltage | 400V |
| Trip Type | Thermal Magnetic |
| Mechanical Life | 20000 cycles |
