EasyManua.ls Logo

Nadoli DS603648C-CL - User Manual

Default Icon
17 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
36'' x 48'' Rectangular Sliding Shower Door
DS603648C-CL
Dimension of shower door:
Profile adjustment :+25mm/1"
Rev. April 11,2018
870~895mm
(34-1/4"~35-1/4")
1174~1199mm
(46-13/16"~47-13/16")
1850mm(72-13/16")
(870~895) x (1174~1199) x 1850mm(H) / (34-1/4"~35-1/4") x (46-13/16"~47-13/16") x 72-13/16"(H)
Question and Answer IconNeed help?

Do you have a question about the Nadoli DS603648C-CL and is the answer not in the manual?

Summary

General Information

Safety Glass Note

Safety glass cannot be re-worked.

Aftercare Instructions

Instructions for cleaning and maintaining the shower.

Tools Required

List of tools needed for installation.

Shower Door Assembly and Parts

Assembly Drawing

Diagram illustrating the shower door assembly process.

Required Parts

List of all components included in the shower door kit.

Shower Door Installation Steps

Step 1: Wall Mounting Preparation

Preparing wall studs and drilling holes for mounting.

Step 2: Attaching Rails to Panels

Assembling fixed panels with top and bottom rails.

Step 3: Securing Panels

Tightening screws to fix the shower door panels.

Step 4: Combining Door Panels

Combining different sized door panels with screws.

Step 5: Installing Door Pieces

Installing door components onto the wall-attached pieces.

Step 6: Wheel Installation

Inserting top and bottom wheels into the rails.

Step 7: Water Deflectors and Handle

Installing water deflectors and the handle set.

Step 8: Adjusting Sliding Door

Adjusting door alignment using top wheel screws.

Step 9: Final Panel Securing

Tightening wall and door frame with screws.

Step 10: Sealing Joints

Applying silicone to exterior joints for sealing.

Shower Base Installation

Important Information

Key notes and recommendations before starting base installation.

Acrylic Shower Base Care

Guidelines for cleaning and protecting the acrylic shower base.

Tools and Materials for Base Installation

List of required tools and materials for shower base setup.

Base Installation Steps

Sequence of actions for installing the shower base.

Step A01: Prepare Base

Remove protective film from the shower base.

Step A02: Frame Measurement

Measuring and marking frame dimensions for base placement.

Step A03: Base Placement

Positioning the shower base within the frame.

Step A04: Frame Support

Securing the shower base to the frame.

Step A05: Drain Connection

Correctly drilling and connecting the drain pipe.

Step A06: Mortar Application

Applying mortar under the shower base for support.

Step A07: Wall Sealing

Sealing the shower base to the wall stud.

Step A08: Curing and Finalization

Allowing mortar to dry and applying final sealant.

Attention and Warning Notes

Critical attention and warning messages for installation.

Warranty and Maintenance

Warranty Information

Details of the product warranty coverage and limitations.

Maintenance Guidelines

Instructions for cleaning and upkeep of the product.

Nadoli DS603648C-CL Specifications

General IconGeneral
BrandNadoli
ModelDS603648C-CL
CategoryBathroom Fixtures
LanguageEnglish

Related product manuals