To Next PageTo Next Page
Need help?Do you have a question about the Nadoli DSR543648C-CL and is the answer not in the manual?
Safety glass cannot be re-worked after manufacturing.
Read instructions carefully; avoid hidden pipes; may need two people.
Clean with soap and water; avoid abrasive cleaners and harsh chemicals.
Prepare roller and handle holes on the shower door panel for installation.
Adjust eccentric nuts for roller height to level the door panel.
Ensure measurements match base and door before drilling holes for the wall jamb.
Install the wall jamb, ensuring holes face the interior of the shower.
Cut the shower rail to the required measurement and install.
Adjust with setting blocks and use pliers carefully to avoid scratching.
Install screws, ensuring correct orientation into the shower interior.
Attach door panel and adjust with setting blocks for proper fit.
Assemble rail components and attach fixed panels.
Install rollers and setting blocks for the sliding door mechanism.
Install the main door panel, connecting it to the roller and rail system.
Level the installed door panel by adjusting the eccentric roller nuts.
Install lock knob sets and do not forget the specified gaskets.
Install remaining gaskets and covers for sealing.
Assemble the door handle and attach it securely to the glass panel.
Install the secondary rail, cutting it to the actual measurement if needed.
Apply silicone sealant to edges and allow 24 hours for drying before use.
Specifies warranty coverage for the first buyer residing in the property.
Guidelines for cleaning and maintaining the product's surfaces.
Details what parts and defects are covered under the 1-year and 10-year warranty periods.
Lists conditions and damages that are not covered by the warranty.
General| Brand | Nadoli |
|---|---|
| Model | DSR543648C-CL |
| Category | Bathroom Fixtures |
| Language | English |
