Need help?Do you have a question about the Nady Systems EO3 and is the answer not in the manual?
Connects the EO3 to a mixing console via a 1/4" mono phone jack.
Front panel mic input for cueing performers; designed for electret condenser mics.
Adjusts transmitter gain using the 'TX' LED indicator for optimal performance.
Verifies proper transmitter broadcast by checking the 'TX' LED status.
Channel selection is controlled by DIP-switches inside the transmitter.
Guidelines for operating multiple EO3 systems simultaneously in the same location.
Receiver is factory pre-tuned to transmitter channel; retuning requires service.
Instructions for installing and preserving 9V battery life in the receiver.
Proper use of included EB-3 earbuds and optional soft rubber inserts for best seal.
How to turn the receiver on/off and adjust volume using the control wheel.
Setting a comfortable and safe listening level for the ear monitor.
How to test reception quality and identify/resolve potential "drop out" zones.
General performance metrics for the entire EO3 wireless system.
Detailed technical specifications for the EO3 transmitter unit.
Detailed technical specifications for the EO3 receiver unit.
Contact Nady Service Department for assistance and return authorization within the US.
Contact local Nady distributor for service or warranty matters outside the US.
Outlines conditions for warranty validity, including authorized purchase and service.
Step-by-step instructions for obtaining factory service and returning the unit.
General| Brand | Nady Systems |
|---|---|
| Model | EO3 |
| Category | Microphone system |
| Language | English |
To Next Page