Nady Systems UHF-24 - User Manual

NADY SYSTEMS, INC.
6701 Shellmound Street • Emeryville, CA 94608
Tel: 510.652.2411 • Fax: 510.652.5075 • www.nady.com
SERVICE INFORMATION
(U.S.)
If you are experiencing operation problem with your system, check out the support
page on the Nady website: www.nady.com for help and for contacting the Nady Service
Department. Should your wireless System require service, you must contact the Nady Service
Department at (510) 652-2411 for a Return Authorization (R/A) Number and a service quote
(if out of warranty). Make sure the R/A Number is clearly marked on the outside of the pack-
age. Cashier’s check or money is enclosed (If not prepaid with credit card), and ship the unit
prepaid to: Nady System Inc., Service Department, 6701 Shellmound Street, Emeryville, CA
94608. Include a brief description of the problem you are experiencing, for service of a unit
under warranty follow the instruction of your Warranty Card regarding Warranty Service.
(International)
For service, please contact the NADY distributors in your country through the
dealer from whom you purchase this product.
DO NOT ATTEMPT TO SERVICE THIS UNIT YOURSELF, AS THAT WILL VOID YOUR
WARRANTY.
OWNER’S MANUAL
UHF-24
Dual Channel Receiver
UHF Wireless Microphone System

Summary

Service Information

System Features Overview

UHF-24 Receiver Features

Details the capabilities and design of the dual channel receiver unit.

UH-4 Handheld Transmitter Features

Describes the Nady DM-10D cartridge, switch, and housing of the handheld mic.

UB-4 Bodypack Transmitter Features

Outlines the compact bodypack's input, controls, and battery compartment.

Link-4 Plug-In Transmitter Features

Explains the plug-in transmitter's ability to convert dynamic mics to wireless.

Cautions and Troubleshooting

Feedback, Microphone Damage, and No Audio

Guidance on avoiding acoustic feedback, protecting mics, and resolving no audio issues.

RF Interference Management

Steps to manage radio frequency interference and understand FCC regulations.

UHF-24 Receiver Operation Details

Connecting Audio Outputs

Instructions for linking the receiver's balanced XLR and unbalanced 1/4" outputs.

Tone Squelch Functionality

Explains the Tone Squelch circuit for RF interference protection and noise reduction.

Link-4 Plug-In Transmitter Setup

Link-4 Transmitter Setup and Battery

Guides on battery installation and general setup for the LINK-4 transmitter.

Link-4 Microphone Connection

Instructions for attaching handheld and lavalier microphones to the transmitter.

Link-4 Microphone Operation

Covers turning on/off, battery indicators, and battery life for the LINK-4.

UH-4 Handheld Transmitter Operation

UH-4 Transmitter Setup and Battery

Instructions for battery setup, operation, and transmitter level adjustment.

UH-4 Level Trim Adjustment

Guidance on optimizing audio input gain for the UH-4 handheld transmitter.

UB-4 Bodypack Transmitter Operation

UB-4 Transmitter Setup and Battery

Instructions for battery installation and general setup for the UB-4 bodypack.

UB-4 Input Selection and Connection

Details on selecting audio inputs and connecting mics/instruments to the UB-4.

UB-4 Level Trim Adjustment

Guidance on optimizing audio input gain for the UB-4 bodypack transmitter.

Nady Systems UHF-24 Specifications

General

Channels	24
Modulation	FM
Dynamic Range	>100dB
Type	Wireless microphone system
Audio Frequency Response	50Hz-15kHz
Power Supply	12V DC, 500mA