USER GUIDE
RSM-5 Ribbon Studio Microphone
UNPACKING, INSPECTION, STORAGE AND TRANSPORT
Your RSM-5 microphone was carefully packed at the factory, and the shipping carton and internally padded wooden storage case were
designed to protect the unit during shipping. Please always store your mic in the wooden case and also retain the shipping container for
subsequent transport and in the highly unlikely event that you ever need to return your microphone for servicing. Please note: since the
ribbon assembly of the RSM-5, as with all ribbon microphones, is extremely fragile, you must verify immediately upon receipt of your
microphone that it has not been damaged during shipment and is operating correctly. The warranty on this microphone does not extend
beyond an initial inspection, since these microphones can be so easy damaged during handling and use. If the unit arrived damaged
please return it immediately to where you bought it. Units that are damaged in use can be returned to Nady Systems and the ribbon
assembly replaced for a xed charge (see Service section below).
STANDARD ITEMS SUPPLIED
OPTIONAL ACCESSORIES
• RSM-5 ribbon microphone
• Padded nylon carrying case
• Padded wooden storage box
• Shockmount
• User Guide
• Warranty card
FEATURES
Congratulations on purchasing the Nady RSM-5 Ribbon Studio Microphone. This superior neoclassic
microphone is designed for use in contemporary, state-of-the-art studios, yet offers the unique natural
sound previously only available on such classic large ribbon mics as the legendary RCA 44, which is
still used to make great recordings today after almost 70 years. Perfect for recording studio vocals,
acoustic instruments, strings, horns, orchestras and choral groups, ambient instrument audio, and many
live sound applications. Powerful and versatile, and with the unmatched natural sound of classic ribbon
mics, the RSM-5 meets the stringent requirements of even the most demanding digital recording and live
broadcasting applications.
This user guide covers the operation of the RSM-5 microphone and the available optional accessories.
To take full advantage of the superb features of your microphone, and to enjoy long and trouble-free
use, please read this user’s guide carefully. As ribbon microphones are, by their design, very sensitive to
damage from mishandling and use, it is very important to read and observe the precautions below about
proper use.
• MPF Series Pop Filter (highly recommended, as ribbon micro-
phones are very susceptible to damage from strong air blasts, as
with percussive sounds during recording)
• The unmatched sound of a classic ribbon (velocity) mic — rich,
warm and musical
• Perfect for close miking of guitar amps and cabinets, brass
instruments, strings, piano, percussion, vocals and orchestra
ambiance. Unique, compact shape for easy, unobtrusive mic
placement anywhere.
• Low-tension 45mm long, 2-micron thick aluminum ribbon design
with typical “large, mellow” ribbon audio reproduction. Smooth,
natural extended low and high ends, and detailed, realistic mids
• Unparalleled overall stunning realism with fast, accurate
transient response, ultra-high dynamic range and >135 dB SPL
capability
• Utmost versatility in dialing in the desired sound by varying
the mic placement. Figure-8 audio directional (pickup) pattern
for both front and rear side, with extended sweet spots (as
compared to large diaphragm condenser mics). Can be used
with a second RSM-5 for individual recording volume control of 2
separate sources by placing each source in the principal axis of
one mic and the off-axis null of the other.
• Manufactured with the nest materials — a machined housing
with advanced internal shockmount construction for the highest
structural integrity and rugged reliability
• Supplied with a shockmount and a carrying bag.
To Next Page
Need help?
Acoustic Specifications
