NAG/IM/ETC 600/01/22 15
Storing:
Switch OFF the calibrator using the power
control switch.
Turning OFF the calibrator during the calibration
process, will not damage the instrument.
If you intend to store the calibrator in the
Packing Box after use, you must ensure that the
instrument has cooled to a temperature
(maximum at 10˚C / 50˚F – very close to ambient
temperature) above ambient before placing it in
the Packing Box
Transporting:
The Inserts must be removed to avoid damage to
the instrument if the calibrator is to be
transported to long distances