Nahita 2640 Series - User Manual

Revisión 1 Junio-2011 Manual de instrucciones 5264xxxx Pág. 1
CENTRÍFUGAS ANGULARES DIGITALES
ECO DIGITAL CENTRIFUGE
CENTRIFUGEUR DIGITAL ECO
SERIE | SERIES | SÈRIE 2640
Este manual es parte inseparable del aparato por lo que debe estar
disponible a todos los usuarios del equipo. Le recomendamos leer
atentamente el presente manual y seguir rigurosamente los proce-
dimientos de uso para obtener las máximas prestaciones y una
mayor duración del mismo.
This manual should be available for all users of these equipments. To get
the best results and a higher duration of this equipment it is advisable to
read carefully this manual and follow the processes of use.
Nous vous recommandons lire attentivement cet manuel d’instructions et
suivre tous les procédures d’usage, à fin d’obtenir les meilleures preesta-
tions et une mayeur duration de l’equipe.

Summary

9. MAINTENANCE AND SERVICE

Instructions on environment protection

Guidance on proper disposal of equipment at end of life cycle for environmental protection.

8. ANALYSIS OF COMMON FAULTS AND ELIMINATION THEREOF.

1. FOREWORD

2. IMPORTANT HINT

Key considerations and tips for safe and optimal operation of the centrifuge.

3. SAFETY PRECAUTIONS

Essential safety guidelines to follow before and during equipment operation.

1.1. Prior to power-on

Checks and procedures to perform before starting the centrifuge.

1.2 During the use

Safety measures and considerations while the centrifuge is in operation.

Operation description

Modify time

Steps to set the operational time, including continuous or fixed duration.

Modify rotating speed

Instructions for adjusting the centrifuge's rotational speed (RPM).

Modify centrifugal force

Procedure for selecting and setting the relative centrifugal force (RCF).

Fault alarm prompts:

Interpretation of audible alarms indicating specific operational issues or states.

7. USE AND OPERATION

Preparation and checks prior to use

Pre-operation checks and setup procedures for the centrifuge.

4. MAIN TECHNICAL PARAMETERS AND PERFORMANCE INDEXES

2.1 Main technical parameters

Key technical specifications of the centrifuge models, including speed and capacity.

2.2 Performance indexes.

Performance specifications and metrics for the centrifuge operation.

5. OPERATING PRINCIPLE

6. STRUCTURAL DIAGRAM AND SYSTEM BLOCK DIAGRAM

Nahita 2640 Series Specifications