NAIM DAC-V1 - Introduction to the Naim DAC-V1; DAC-V1 Overview; Installing and Connecting the DAC-V1; Signal Ground Switch

Contents
Section Page
Contents
1. Introduction 1
1.1 DAC-V1 Basics 1
1.2 DAC-V1 Audio Inputs 1
1.3 DAC-V1 Audio Outputs 1
1.4 DAC-V1 Volume Control 2
1.5 DAC-V1 BitPerfect Analysis 2
2 Computer audio via the DAC-V1 3
2.1 Configuring Windows OS 3
2.2 Configuring Mac OS X 5
2.3 Configuring Playback Applications 6
3 DAC-V1 Installation and Connection 7
3.1 DAC-V1 Rear Panel Connections 7
3.2 Mains Power Connection 7
3.3 Audio Inputs and Outputs 7
3.4 Signal Ground Switch 8
4 DAC-V1 Operation 9
4.1 DAC-V1 Front Panel 9
4.2 DAC-V1 Remote Handset 9
4.3 DAC-V1 Display 10
5 DAC-V1 Setup 11
5.1 The Setup Mode Menu 11
5.2 The Settings Menu 11
5.3 The BitPerfect Menu 12
5.4 The USB Status Menu 13
5.5 The Firmware Menu 13
6 DAC-V1 Specifications 15
Note: This manual is Issue No. 1 and describes the operation of
DAC-V1 units running software release version 1.5.