GT30 Configuration Settings
GT10/GT30
113
6.2 Entering Configuration Settings from GTWIN Screen Creation Tool
Handle Communication Error
Clicking on the
button displays the “Communication Error Remedy” dialog
box. This is used to specify the processing to be used if a communication error occurs.
“Communication Error Remedy” dialog box
For “Retry” and “Waiting”, click the
button and specify the values in the
“Value Set” dialog box that is dis-
played.
For “Display Error Code”, select “Off”,
“On (Hold)”, or “On (Unhold)” by click-
ing the radio button of the desired val-
ue to turn it on.
Retry - - - This specifies the number of retries if a communication error occurs. The
setting range is from 0 to 255 times.
Waiting - - - Thisspecifiestheintervalbetweenretriesifacommunicationerroroccurs.
The setting range is from 0 to 255 seconds.
To Next Page
Loading...