What to do if the Nakamichi DRAGON 11.4.6 Speaker System remote does not work?
If your Nakamichi Speaker System remote isn't working, try these steps: 1. Replace the batteries with new ones. 2. Try re-pairing the remote control to the main unit. 3. Ensure you're using the remote within a reasonable distance from the main unit. 4. Make sure the remote is in Bluetooth mode.
What to do if there is no sound from the Nakamichi DRAGON 11.4.6?
If you're not getting any sound from your Nakamichi DRAGON system, here are a few things to check: * Ensure the external output is set to 'EXT OFF'. * Make sure the volume on the DRAGON is at an audible level. * Check the volume of your external device. * Verify all cable connections to the DRAGON are secure. * Try a soft reset, and if that doesn't work, try a hard reset followed by an HDMI Connection Refresh.
What to do if HDMI eARC/ARC is not working on Nakamichi DRAGON 11.4.6?
If you're experiencing issues with HDMI eARC/ARC, such as no sound or video, or the system switching sources erratically, try the following: * Restore the DRAGON's factory settings to refresh the HDMI settings. * Perform a hard reset to establish a new HDMI handshake.
Why does my Nakamichi subwoofer sound weaker than expected?
If the bass from your Nakamichi subwoofer seems weaker than expected, consider the following: * Verify the power connections to both subwoofer units. * Press SUB+ on your remote until 'Quad Subs' appears on the main unit display. * Access the DRAGON's OSD by pressing 'Home' and navigate to Calibration > Volume Level Calibration. * Keep in mind that some content may have weak bass effects. * Experiment with the placement of your subwoofer.
What to do if TV is not sending sound to Nakamichi Dragon from streaming apps?
If your TV isn't sending sound from streaming apps/devices to your Nakamichi DRAGON, ensure the following: * The DRAGON is connected to the TV using the designated cable included in the box. * HDMI eARC and HDMI-CEC may need to be enabled in your TV settings.
What to do if Nakamichi device cannot connect to DRAGON via Bluetooth?
If your device is having trouble connecting to the Nakamichi DRAGON via Bluetooth: * Ensure the DRAGON is set to BT Mode for playback. * Check if the DRAGON's LED display shows 'BT' without blinking, indicating another device is already connected. * Instruct your device to forget the 'DRAGON' connection and try again.
What to do if I have intermittent audio cut out or no sound on Nakamichi?
If you experience intermittent audio cut-outs or no sound with your Nakamichi system, try these steps: * Perform a soft reset. * Disconnect the problematic source device from the main unit or TV. * Unplug the source device from the AC outlet for 5 minutes, then power it back on. * While the source device is on, reconnect it to the main unit or TV. * Ensure you are using the recommended audio settings for optimal performance.
Why does the Nakamichi DRAGON 11.4.6 sound drop out when connected via Bluetooth?
Sound dropouts when connected via Bluetooth to your Nakamichi system can occur due to: * Radio interference from devices located too close to the main unit. * Excessive distance between your Bluetooth device and the main unit. * Obstructions, such as metal furniture, between the main unit and your device. Check your installation environment.
What to do if there is no sound from Nakamichi wireless subwoofers or surround speakers?
If you're not getting any sound from the wireless subwoofers or surround speakers of your Nakamichi system: * Ensure they are properly connected to a power source. * Check the wireless connection between the main unit and the speakers. * Run a soundcheck.
What to do if Nakamichi surround sound volume is lower than expected?
If the surround sound volume on your Nakamichi system is lower than you'd expect: * Ensure your device is sending a surround sound signal to the DRAGON. * When using Bluetooth or Aux-In for stereo content, press 'All Channel Stereo' to send the sound to the surround speakers. * Use the remote to press SS+/SB+ to increase the volume of the surround effects.
General| Configuration | 11.4.6 |
|---|---|
| Wireless Subwoofer | Yes |
| Subwoofer | Yes |
| Rear Speakers | Yes |
| Connectivity | HDMI |
| Sound Technology | Dolby Atmos, DTS:X |
Lists all components included in the DRAGON sound system package.
Details the buttons and ports on the DRAGON main unit for operation and connectivity.
Guides on optimal positioning for the main unit and subwoofers for best audio performance.
Provides guidance on placing surround speakers for an immersive audio experience.
Explains how to adjust the PerfectHeight Mechanism for directed height effects.
Step-by-step instructions for connecting power to the main unit, subwoofers, and surround speakers.
Details how to establish an audio connection between DRAGON and your TV using HDMI ARC/eARC.
Suggested audio configurations for various devices to optimize sound output to DRAGON.
Overview of the remote control buttons and their functions for operating the DRAGON system.
Explains different surround modes, equalizer presets, and night mode for audio customization.
Guides on how to adjust the bass and treble levels to personalize the sound profile.
Options for enabling or disabling subwoofers to match listening preferences and room acoustics.
Instructions for fine-tuning the volume levels of the up-firing height speakers for better immersion.
Explains how to use AHD technology to optimize height effects based on room acoustics.
Instructions on how to access and navigate the On-Screen Display menu for system settings.
Details various audio settings including surround modes, equalizer, and advanced audio options.
Guides on optimizing sound performance through room size and volume level calibration.
How to play built-in surround sound demonstrations and channel test tones to verify system setup.
How to check the current firmware version installed on the DRAGON system.
Step-by-step guide for updating the DRAGON system's firmware via USB for new features and performance.
Methods to verify the connection status between DRAGON and its wireless subwoofers and surround speakers.
Instructions for re-establishing the wireless connection between the DRAGON main unit and subwoofers.
Instructions for re-establishing the wireless connection between the DRAGON main unit and surround speakers.
Technical specifications of the DRAGON system, including drivers, power, and connectivity.
Explanations of technical terms used throughout the DRAGON user manual.
Details the limited warranty terms and conditions for Nakamichi DRAGON products in the U.S.
Practical advice for improving audio performance by addressing common sound issues and room acoustics.
Solutions for common problems, including HDMI connectivity, no sound, and wireless connection issues.
Alternative connection method for TVs without ARC/eARC, using optical or aux-in ports.
How to connect external devices like Bluetooth transmitters using Optical Out and Aux Out ports.
Guide on switching DRAGON's remote to IR mode and teaching IR codes to universal remotes.
To Next Page
