Need help?Do you have a question about the Nakamichi NA788 and is the answer not in the manual?
General| Power Output | 50 watts x 4 channels |
|---|---|
| Display Type | LCD |
| Bluetooth | Yes |
| USB Port | Yes |
| Aux Input | Yes |
| Touch Screen | No |
| Apple CarPlay | No |
| Android Auto | No |
| Backup Camera Input | Yes |
| Peak Power Output | 50 watts x 4 channels |
| Frequency Response | 20Hz - 20kHz |
| CD Changer Control | No |
| Detachable Faceplate | Yes |
| Supported Formats | MP3, WMA |
| Preamp Voltage | 2V |
| Preamp Outputs | 2 |
| RMS Power Output | 22 Watts x 4 Channels |
Key points to prevent damage, ensure proper operation, and avoid accidents during use and installation.
Instructions on resetting the unit to factory settings if it fails to operate properly.
Step-by-step guide for removing the key, disconnecting the battery, making connections, installing, and resetting the unit.
Diagrams and chart detailing the ISO connector pin assignments for proper wiring of the car audio system.
Guide on inserting the half sleeve into the dashboard and bending tabs to secure the holder in place.
Instructions for aligning and tightening screws through the unit's side screw holes for secure mounting.
Adjustments for Bass, Middle, Treble, Balance, Fader, Subwoofer level, and low pass filter for optimal sound.
Enables switching the music listening zone between front/rear speakers for balanced spatial effects.
Settings for Auto Store, Program Type (PTY), Alternate Frequencies (AF), Traffic Announcement (TA), RDS, Area, and Local Seek.
Instructions for inserting a disc and selecting disc mode for playback on the car audio system.
Steps to connect a USB device, insert it into the socket, and select USB mode for playback.
Procedure for detaching the panel, inserting an SD card, and selecting SD mode for playback.
Instructions for connecting an iPod/iPhone via USB adapter and selecting the appropriate mode for playback.
Methods to navigate and select music on an iPod/iPhone using the unit's controls or search functions.
List of Apple iPod and iPhone models supported by the car audio system via a 30-pin dock connector.
Prerequisites for using Bluetooth, including switching on the phone and searching for the device.
Steps to pair a mobile phone with the unit, including inputting a password and confirming successful connection.
Guidance on how to make, receive, answer, and terminate phone calls using the Bluetooth hands-free system.
Details on power supply, fuse, speaker impedance, aux-in level, and fuse rating.
Information on maximum/continuous power output, pre-amp voltage, FM/AM tuner ranges, and sensitivity.
Details on USB device compatibility, memory card support, Bluetooth specs, and audio file formats.
To Next Page
