Nakamichi SHOCKWAFE ELITE 7.2 User Manual

120V~60Hz 0.6A
RISQUE DE CHOC
ELECTRIQUE / NE PAS OUVRIR
AVIS:
DTS, the Symbol, and DTS-HD are registered trademarks of DTS, Inc.
Surround Back Left Surround Back Right
SETTING UP YOUR
HOME THEATER
3.2 ft (1m)
Clearance
3.2 ft (1m)
Clearance
9 ft (2.5m)
Distance
5 ft (1.5m)
6.5 ft (2m) 6.5 ft (2m)
Option A (Recommended)Option A (Recommended)
5 ft (1.5m)
1. Surround soundbar system placement
STOP
PLEASE DO NOT
RETURN THIS UNIT
24HRS OR LESS
RESPONSE TIME
GUARANTEED
Talk to a SHOCKWAFE sound bar specialist
support@nakamichi-usa.com
Web support: www.nakamichi-usa.com/faq Phone Support: (415) 805 6913
Sub
Left
Sub
Right
90 -110
o o
90 -110
o o
3.2 ft (1m)
3.2 ft (1m)
Note:
Illustration is not to scale. Speaker stands are not included.
Surround back speaker drivers should be at ear level and pointed right at the listener’s sitting area.
Web Support: www.nakamichi-usa.com/helpdesk Phone Support: (415) 805 6913 (Mon - Fri 10am - 7pm PST)
6.5 ft (2m)
Option BOption B
6.5 ft (2m)

Nakamichi SHOCKWAFE ELITE 7.2 Specifications

General

Channels	7.2
Subwoofer Type	Wireless
Dolby Atmos	Yes
Bluetooth	Yes
Optical Inputs	1
USB Port	1
Wireless Subwoofer	Yes
DTS:X	Yes
Coaxial Input	1
Connectivity	Bluetooth, HDMI, Optical, Coaxial, USB
Sound Technology	Dolby Atmos, DTS:X
Remote Control	Yes
Type	Soundbar System
HDMI Output (ARC/eARC)	1

Summary

Surround Soundbar System Placement

Connecting with TV and Other Devices

HDMI ARC Connection

Connect source devices to the Sound Bar's HDMI IN jacks for high-quality surround sound via ARC.

Optical Connection

Connect TV's OPTICAL OUTPUT to Sound Bar's OPTICAL INPUT if TV lacks HDMI ARC.

Setting Up Satellite Speakers

Setting Up the Remote Control

Turning on the TV

Turning on the Shockwafe Elite 7.2

Listening to Your Soundbar System

Listen to TV Audio

Select TV program and ensure ARC is enabled on the Sound Bar for TV audio output.

Play Other Input Devices

Select HDMI or Digital (Optical/Coaxial) input using the Sound Bar remote control.

Adjust Volume and Bass

Use Vol +/- for main volume and Bass +/- for subwoofer volume adjustments.

Troubleshooting

Troubleshoot No TV Sound or Picture

Check ARC, HDMI connections, power cycle, and TV/Sound Bar turn-on order for no TV output.

Troubleshoot No Device Output

Verify input source, HDMI connections, and cable seating for no device output.

Troubleshoot Subwoofer Low Volume

Increase volume, check audio format (BITSTREAM vs PCM) for subwoofer sound issues.