To Next Page
C
Charles PughAug 15, 2025
Why my Nakayama PB5221 is not starting?
- AAmy MccartyAug 15, 2025
Your Nakayama Brush Cutter might not be starting due to several reasons: * Lack of fuel in the tank or an obstructed fuel filter. * Fuel quality issues such as dirty fuel, water contamination, or an improper fuel mixture. * Issues with the spark plug, including oily deposits, insulation damage, or an incorrect spark gap. * Problems with the high voltage wire or coil. * Issues related to the piston ring, spark plug, or leakage in the cylinder and crankcase. * Poor contact between the high voltage wire and spark plug, or a faulty stop switch.
General