nalanda MD030 - Quick Start; Prepare with the Three Metal Samples; Lay the Detector; Turn on

7
QUICK START
1. Prepare with the three metal samples
 an iron nail
 a 5
￠
nickel coin
 a 25
￠
silver coin
2. Lay the detector
Place the detector on a wooden or plastic table, let the search coil exceeds the
table edge about more than 20cm.keep the detector away from the wall, ceiling and
floor, turn off all the equipment which can cause elector-magnetic interference. Please
take off the watch, ring or other metal objects on your hand. ( See Fig.8).
Fig.8
3. Turn on
Press the POWER button, and the detector will make moo tones twice, all the
LCD patterns are lighted at minute, the detector is in the ALL METAL mode by
default, and the sensitivity is in the second grade.(See Fig.9)
Fig.9
4. Test