Why don't checker units react to passing coins on my NAMCO CASINO WINNER Arcade Game Machines?
If the checker units aren't reacting to coins on your NAMCO Arcade Game Machine, check: * Defective checker sensors: Replace the checker sensors. * Defective Sensor PC Boards: Replace the Sensor PC Boards. * Defective Main PC Board: Replace the Main PC Board.
Why are the coin hoppers not operating in my NAMCO CASINO WINNER?
The coin hoppers may not operate because of a few reasons: * There might be foreign items inside the coin hoppers; remove the coin hoppers and clear any obstructions. * The coin hoppers themselves could be defective, requiring replacement. * The main PC board might be defective, and it may need replacing.
What to do if the fluorescent lamps do not light in NAMCO Arcade Game Machines?
If the fluorescent lamps in your NAMCO Arcade Game Machine don't light, the issue might be: * Burnt out fluorescent lamps: Replace the fluorescent lamps. * Defective starters: Replace the starters.
What to do if the coin hoppers operate but don't dispense coins in NAMCO CASINO WINNER?
If the coin hoppers in your NAMCO Arcade Game Machine are running but not dispensing coins, consider these possibilities: * Not enough coins: Add more coins to the hoppers. * Jammed coins: Remove the coin hopper and clear any jammed coins. * Improper installation: Reinstall the hoppers correctly.
Why is my NAMCO Arcade Game Machine operating unstable or malfunctioning?
If your NAMCO Arcade Game Machine is unstable or malfunctioning, the supply voltage may be outside the correct value of 230vAC. Measure the supply voltage and ensure that the specified voltage is supplied.
Why don't the arrows lamps light up on my NAMCO CASINO WINNER Arcade Game Machines?
If the arrow lamps on your NAMCO Arcade Game Machine aren't lighting up, check: * Burnt out lamps: Replace the lamps. * Defective Andon Control PC Board: Replace the Andon PC Board.
Why can't coins be inserted into the coin entries of my NAMCO CASINO WINNER Arcade Game Machines?
If coins cannot be inserted into the coin entries on your NAMCO Arcade Game Machine, it might be because: * The lock-out solenoid is defective: Replace the lock-out solenoid. * A foreign item is stuck in the coin entry: Remove the foreign item.
What to do if the fluorescent lamps do not light in NAMCO CASINO WINNER? (Second entry)
If the fluorescent lamps in your NAMCO Arcade Game Machine don't light, it could be due to: * Burnt out fluorescent lamps: Replace fluorescent lamps. * Defective inverter circuit board: Replace the inverter circuit board. * Burnt out WIN lamps: Replace the WIN lamps.
Why do the checker units not light up on my NAMCO Arcade Game Machines?
If the checker units on your NAMCO Arcade Game Machine aren't lighting up, it could be due to: * A defective LED PC Board: Replace the LED PC Board. * A defective Main PC Board: Replace the Main PC Board.
Why does the pusher table vibrate in my NAMCO Arcade Game Machine?
If the pusher table in your NAMCO Arcade Game Machine vibrates, it might be because: * The pusher shafts need grease: Apply grease to the pusher shafts. * The flanged bushings are worn: Replace the flange bushings.
General| Manufacturer | Namco |
|---|---|
| Category | Arcade Game Machines |
| Model | Casino Winner |
| Controls | Buttons |
| Power Supply | AC |
To Next Page