What to do if my NAMCO Arcade Game Machine fails to start?
If your NAMCO Arcade Game Machine doesn't start, ensure the power plug is firmly inserted into the power outlet. A disconnected power plug is a common cause.
Why does the pusher table vibrate in my NAMCO Arcade Game Machine?
If the pusher table in your NAMCO Arcade Game Machine vibrates, it might be because: * The pusher shafts need grease: Apply grease to the pusher shafts. * The flanged bushings are worn: Replace the flange bushings.
What causes no sound from the speakers in NAMCO CASINO WINNER Arcade Game Machines?
If there's no sound coming from the speakers of your NAMCO Arcade Game Machine, check these: * Sound volume: Adjust the sound volume to an audible level. * LCD PC Board: If adjusting the volume doesn't work, the LCD PC Board may be defective and need replacement.
How to fix frequent tilt device activation in NAMCO Arcade Game Machines?
If the tilt device is activating too often on your NAMCO Arcade Game Machine, check the following: * Tilt sensitivity: Adjust the tilt sensitivity. * Level adjusters: Adjust the level adjusters to ensure the machine is properly leveled.
Why do the coin hoppers not stop operation in my NAMCO Arcade Game Machine?
If the coin hoppers in your NAMCO Arcade Game Machine don't stop, it could be due to: * Defective coin hoppers: Replace the coin hoppers. * Defective main PC Board: Replace the main PC Board.
What to do if the pusher table does not operate in NAMCO CASINO WINNER?
If the pusher table isn't working, it might be due to: * A foreign item obstructing its movement: Remove any foreign objects. * A defective pusher motor: Replace the pusher motor. * A defective pusher sensor: Replace the pusher sensor. * A defective main PC Board: Replace the main PC Board. * A defective AC switch PC Board: Replace the AC switch PC Board.
Why is my NAMCO Arcade Game Machine operating unstable or malfunctioning?
If your NAMCO Arcade Game Machine is unstable or malfunctioning, the supply voltage may be outside the correct value of 230vAC. Measure the supply voltage and ensure that the specified voltage is supplied.
What to do if the coin hoppers operate but don't dispense coins in NAMCO CASINO WINNER?
If the coin hoppers in your NAMCO Arcade Game Machine are running but not dispensing coins, consider these possibilities: * Not enough coins: Add more coins to the hoppers. * Jammed coins: Remove the coin hopper and clear any jammed coins. * Improper installation: Reinstall the hoppers correctly.
What to do if the fluorescent lamps do not light in NAMCO Arcade Game Machines?
If the fluorescent lamps in your NAMCO Arcade Game Machine don't light, the issue might be: * Burnt out fluorescent lamps: Replace the fluorescent lamps. * Defective starters: Replace the starters.
Why are the coin hoppers not operating in my NAMCO CASINO WINNER?
The coin hoppers may not operate because of a few reasons: * There might be foreign items inside the coin hoppers; remove the coin hoppers and clear any obstructions. * The coin hoppers themselves could be defective, requiring replacement. * The main PC board might be defective, and it may need replacing.
General| Manufacturer | Namco |
|---|---|
| Category | Arcade Game Machines |
| Model | Casino Winner |
| Controls | Buttons |
| Power Supply | AC |
To Next Page