To Next PageTo Next PageWhat to do if mini pucks frequently mix into the L hopper of NAMCO PAC-MAN SMASH?
If mini pucks are frequently mixing into the L hopper of your NAMCO Game, ensure that the pendulum stopper on rail (L) assembly is correctly installed. Also, check and clean the puck paths on the rail (R) assembly, as they may be dirty.
What to do if pucks remain inside the joint rail cover of NAMCO PAC-MAN SMASH Game?
If pucks are remaining inside the joint rail cover of your NAMCO Game, the S divider outlet sensor may be malfunctioning, requiring replacement.
What to do if multiple big pucks are supplied at once in NAMCO Game?
If multiple big pucks are being supplied at once in your NAMCO Game, ensure that the L rail (H) cover is correctly installed. Also, the L divider outlet sensor may be malfunctioning and require replacement.
What to do if the L divider solenoid does not operate in NAMCO PAC-MAN SMASH?
If the L divider solenoid in your NAMCO Game is not operating, check for any foreign objects inside the L escalator assembly and remove them by taking off the L rail (H) cover. If there are no obstructions, the L divider solenoid itself may be malfunctioning and need replacement. It's also possible that the switching regulator (24V) is malfunctioning, requiring replacement as well.
What to do if the time LED PC board does not light in NAMCO Game?
If the time LED PC board in your NAMCO Game does not light up, the time LED PC board itself may be malfunctioning and need replacing. Alternatively, the main PC board could be the problem, and it may also need replacement.
Lists essential safety measures for operating the machine safely.
Outlines rules and actions players must follow for safe gameplay.
Highlights critical components that ensure the safety of players and bystanders.
Covers safety and function checks before and after machine startup.
Covers technical procedures for installing and assembling the machine.
Detailed procedures for replacing various machine components.
Explains error codes and provides troubleshooting steps for technicians.
Covers troubleshooting for common issues across machine assemblies and components.
General
