Page 59
4. Remove the 4off Security screws (M5x12) and remove the Front Acrylic Retaining
brackets.
Note: The Front Acrylic will tilt forward when the retaining brackets are moved, so
ensure that the acrylic is being held in place with a hand.
5. The Front Acrylic sits in a groove on the Target Cabinet. Lift the Acrylic in the
direction of the arrow, in the diagram below, to remove it.
6. Refit the Front Acrylic in reverse order.
Note: When refitting, ensure that both the Front Acrylic and the Retaining brackets
are located in the wooden groove before fitting the 4off security screws (M5x12)
Retaining bracket
Security screw
(M5x12)
Front Acrylic
Front Acrylic
Wooden groove
Front Acrylic
Front Acrylic
Groove
Retaining bracket
Retaining bracket
To Next Page
Loading...
