NAMCO Quick & Crash - Replacing the Shutter Solenoid

Page 74
7-17 Replacing the Shutter Solenoid
1.Remove the Front Maintenance Door from the Target Cabinet (See section 7-10
page 64).
2. Disconnect connector (CN28).
3. Remove 4off socket flange screws (M5x8) and remove the Shutter Solenoid.
Socket Flange Screw
(M5x8)
Ring Tag
Connector
(CN28)
Shutter Solenoid
Spacer
(6dia x 10)
Solenoid
Plunger
Spacers
(6dia x 5)
Tension Spring
Solenoid
Shaft#2
Spacer
(6dia x 5)
Solenoid Springs
Spring Supports