NAMCO Quick & Crash - Replacing the Gun Switch, Trigger and Lens

Page 99
7-34 Replacing the Gun Switch, Trigger and Lens
1. Loosen 2off screws (M3x8) retaining the Gun Sight.
2. Remove 7off cap bolts (M3x8) and remove Gun Side (R).
The grip is permanently fixed to the gun side (R).
3. Disconnect the two Faston terminals to remove the Gun Switch, Trigger and
Lens.
Sight
Gun Side (R)
Cap Bolts
(M3x8)
Grip
Pozi head screws
(M3x8)
Lens
Gun Switch
Fast-on
Terminals
(Black)
(Yellow)
Trigger