To Next PageTo Next PageWhat to do if NAMCO TEKKEN 6 BLOODLINE REBELLION SD-S show 'USB KEY ERROR: WRONG KEY'?
If you see 'USB KEY ERROR: WRONG KEY' on your NAMCO Arcade Game Machine, it means that you've inserted a USB key for a different product, specifically one for Tekken 6. To fix this, insert the correct USB key, which should be the USB key (for EXP) for the “TEKKEN 6 BLOODLINE REBELLION” cabinet.
Why does my NAMCO TEKKEN 6 BLOODLINE REBELLION SD-S Arcade Game Machines show 'USB MEMORY ERROR'?
If your NAMCO Arcade Game Machine displays a 'USB MEMORY ERROR', it's likely because a USB memory stick was connected at the same time as the USB key during startup. To resolve this, disconnect the USB memory stick and restart the machine. Ensure you don't accidentally disconnect the USB key in the process.
What to do if NAMCO Arcade Game Machines show 'USB KEY ERROR: NOT FOUND'?
If your NAMCO Arcade Game Machine shows 'USB KEY ERROR: NOT FOUND', it means that the USB key isn't properly connected or the Game PC Board might be faulty. First, check that the USB key is securely connected. If the error persists, you may need to replace the USB key or the Game PC Board.
What to do if NAMCO TEKKEN 6 BLOODLINE REBELLION SD-S Arcade Game Machines display error occurred (8002****)?
If your NAMCO Arcade Game Machine displays an error code (8002****), it indicates that the HDD is either not connected correctly or that the HDD or Game PC Board is faulty. The suggested solution is to replace the HDD or Game PC Board.
What to do if NAMCO TEKKEN 6 BLOODLINE REBELLION SD-S Arcade Game Machines show 'USB KEY ERROR: CANNOT INITIALIZE*'?
If your NAMCO Arcade Game Machine shows 'USB KEY ERROR: CANNOT INITIALIZE*', it means that the USB key failed to initialize during startup. To fix this, execute “Flash ROM Format” in the Test mode. If the error continues, you may need to replace the USB key.
What to do if my NAMCO TEKKEN 6 BLOODLINE REBELLION SD-S Arcade Game Machines does not dispense cards?
If your NAMCO Arcade Game Machine is not dispensing cards, it might be because the power switch was turned off while a card was still inside. Turn the machine back on; the Game PC Board will check the card data and automatically discharge the card. If the card doesn't automatically discharge, you will need to unlock the card reader/writer unit and manually remove the card.
What to do if NAMCO TEKKEN 6 BLOODLINE REBELLION SD-S show 'USB KEY ERROR: FORMAT FAILED'?
If your NAMCO Arcade Game Machine displays 'USB KEY ERROR: FORMAT FAILED', it means that the Flash ROM formatting for the USB key has failed. The suggested solution is to replace the USB key.
How to fix a NAMCO TEKKEN 6 BLOODLINE REBELLION SD-S Arcade Game Machines that does not start up?
If your NAMCO Arcade Game Machine doesn't start up, it could be due to a disconnected Game PC Board connector. Ensure the connector/Faston terminal is firmly inserted.
General| Category | Arcade Game Machines |
|---|---|
| Platform | Arcade |
| Genre | Fighting |
| Sound | Stereo |
| Game Title | TEKKEN 6 BLOODLINE REBELLION |
| Developer | NAMCO |
| Players | 2 |
| CPU | Cell Broadband Engine |
| Cabinet | Upright |
| Input | 4 buttons |
| Publisher | NAMCO |
Crucial safety measures for operating the machine, focusing on power cord safety and electrical hazards.
Specifies environmental and location requirements for safe indoor machine installation, listing places to avoid.
Step-by-step instructions for safely turning on the main and sub-power switches of the machine.
Essential safety and function checks to perform before operating the machine to prevent accidents.
Regular checks and inspections for level adjusters, power cords, and screws to ensure machine stability and safety.
Steps to diagnose and resolve common machine issues, including error messages and symptoms.
