HOW TO SET UP THE SCOOTER
Maintenance of the scooter
HOW TO ADJUST THE BRAKES
1. please check if the disc is well balanced
2. please check if the disc pad is in the well condition with enough
thickness to provide the braking power needed
3. please adjust the brake pad postion via the two srews on the caliper
Screw 1 Screw 2
• Your tires are fitted with pressure valves.
Use them to re-inflate your tires to a
maximum of 50 psi.
• Any repair must be carried out by a
professional and / or official distributor
of the NAMI Electric brand.
• Never perform maintenance on the
displayed battery is on or charging.
• Clean any stains from your scooter with
a damp cloth.
• Do not use alcohol, gasoline, kerosene,
or other corrosive and volatile
chemicalcleaners.
• Do not wash off with water.
• Make sure that the scooter is switched
off and unplugged during cleaning and
that no water drop or trace of moisture
enters the charging port.
N.B : Non contractual pictures.
Your vehicle may come wth different
brands of brake calipers.
USER MANUAL - EN
19
To Next Page
Loading...
