NAMI ELECTRIC KLIMA - Basic Mode Settings (P8-P14) and Error Codes

BASIC MODE SETTINGS P12
Motor overheating selected value.
Value selected for the motor overheating
temperature limit (155 ° C maximum).
Once the selected value is reached in
the front motor or the rear motor, the
overheating protection pictogram is
displayed on the instrument panel. At the
same time, the maximum current will be
limited to 85% and the turbo mode will
bedisabled.
BASIC MODE SETTINGS P13
Selected value of the remaining battery
power to automatically switch to E mode
which varies from 1 to 100.
The rate of energy remaining in the
battery to automatically switch to E mode
is indicated in%.
E Mode and Riding Mode cannot be
changed until the battery is charged.
BASIC MODE SETTINGS P14
How to set the electronic key: The initial
password is: 0000
To change the password, press the M
button
ON = activation
AP50 = change password: you can enter
the password of your choice
OFF = deactivation
To prevent unauthorized persons from
using the scooter, use the electronic key
DASHBOARD
List of error codes
CODE ERROR
80 Throttle
20 1 Rear motor error
20 2 Front motor error
30 1 Communication error for rear controller
30 2 Communication error for front controller
40 1 Rear controller error
40 2 Front controller error
USER MANUAL - EN 31