Namron ZIGBEE 16A - Groups Cluster; Thermostat Cluster Attributes

0x04
Stores the device’s current state as a scene or updates a previously stored
scene accordingly
Store Scene
0x05
Recall Scene
Reverts the device’s current state using the values from the previously
stored field set.
5.2.3 Groups-0x0004 (Server)
Attributes supported:
Attribute
Type Description
0x0000
bitmap8,
read-only
0, not supported
NameSupport
Command supported:
Command Description
0x00
Adds the endpoint to a group.
Add Group
0x01
View Group
Determines whether the device belongs to a group and returns the group
name, if supported
0x03
Remove Group
Removes this endpoint from the specified group. Also removes all scenes
that refer to this group.
0x04
Remove All Groups
Removes this endpoint from all groups. Also removes all scenes that refer to
any of the existing groups.
0x05
Add Group if Identifying
Adds this endpoint to the group, if the endpoint is identifying.
0x0002
bitmap8 ,
read-only
When this flag is set as 1, it means occupied, OccupiedHeatingSetpoint will be
used, otherwise UnoccupiedHeatingSetpoint will be used.
Occupancy
0x0010
Int8S ,
reportable
LocalTemperatureCalibration
Room temperature calibration, range is -30-30, the maximum resolution this
format allows 0.1°C. Default value: 0
0x0011
int16S ,
reportable
OccupiedCoolingSetpoint
This system is not invalid.
0x0012
int16S ,
reportable
OccupiedHeatingSetpoint
Range is 0-4000,the maximum resolution this format allows is 0.01 ºC. Default
is 0xbb8(30.00ºC)
0x0014
int16S ,
reportable
Range is 0-4000,the maximum resolution this format allows is 0.01 ºC.
Default is 0x258(6.00ºC)
UnoccupiedHeatingSetpoint
0x0001
int16S ,
read-only
reportable OutdoorTemperature
This is floor temperature, the maximum resolution this format allows is 0.01 ºC.
0x0000
int16S ,
read-only
reportable LocalTemperature Attribute
This is room temperature, the maximum resolution this format allows is 0.01 ºC.
Attributes supported:
5.2.4 Thermostat-0x0201(Server)
Attribute
Type Description