Namron TOUCH Z-WAVE 16A - User Manual

INSTRUCTION MANUAL
N
A
M
R
O
N
T
E
R
M
O
S
T
A
T
T
O
U
C
H
Z
-
W
A
V
E
1
6
A

Namron TOUCH Z-WAVE 16A Specifications

General

Protocol	Z-Wave
Maximum Load	16A
Power Supply	230V
Compatibility	Compatible with most Z-Wave controllers
Certification	CE

Summary

Technical Data

Operating Specifications

Details on voltage, load, power consumption, ambient and operating temperature ranges.

Sensor and Control Details

Information on floor sensor types, hysteresis, control modes, and types.

Ratings and Standards

Includes IP rating, relevant standards, and certifications.

Installation

Wiring Diagram

Illustrates the electrical connections for the thermostat.

Mounting Instructions

Steps for physically installing the thermostat unit.

Symbol Overview

Interface Symbols Explained

Visual guide to icons and indicators on the thermostat display.

Settings Menu

Time and Date Configuration

Guide to setting the device's time and date parameters.

Preview and Information Access

How to view system configurations, energy usage, and other data.

Control Mode Operations

Away Mode Functionality

Details on setting temperatures and schedules for when the user is away.

Auto Mode Scheduling

How to configure automatic temperature adjustments based on time schedules.

Manual and Drying Modes

Using manual temperature control and the specific drying function.

Off Mode and Anti-Freezing

How the device operates in Off mode, including anti-freezing protection.

Monitor Set Functions

Over-current and Over-heat Alarms

Configuration and handling of over-current and over-heat alarms.

Hysteresis and Vibration Settings

Adjusting hysteresis for temperature stability and vibration/buzzer levels.

Display Brightness and Sensor Selection

Adjusting screen brightness and choosing the displayed temperature sensor.

Other Settings

Temperature Compensation

Adjusting temperature readings for room and floor sensors.

Re-power Status Configuration

Defining device behavior after a power failure or reset.

Internal Over Heat Protection

Safety feature to temporarily turn off the relay if internal temperature is too high.

Z-Wave Network Management

Z-Wave Network Operations

Adding, removing, and resetting the device within a Z-Wave network.

Basic Command Class Settings

Setting device operation modes using command class basic set values.

Supported Notification Reports

Details on notification types like Over Current and Over Heat alarms.

Technical Specifications

Information on SDK, device type, generic/specific classes, and role type.

Thermostat Specifications

Command Class Support

Lists supported Z-Wave command classes for thermostat mode and setpoint.

Association Configuration

Endpoint Command Lists

Command lists for root endpoint, endpoint 1, and endpoint 2 (floor sensor).

Grouped Associations

Details on Lifeline and Heat Set associations for device communication.

Advanced Configuration Parameters

Parameter Groupings

Overview of parameters related to alarms, sensors, and settings.

Mode and Schedule Parameters

Configuration for auto mode schedules and drying mode duration.

Temperature and Reporting Parameters

Settings for temperature compensation, reporting intervals, and thresholds.

Display and Time Zone Settings

Parameters for display brightness, sensor selection, and time zone.