Namron ZIGBEE 16A - Page 2

Namron termostat touch ZigBee 16A
INSTRUCTION MANUAL
Technical data
ZigBee Frequency
Operation voltage
Maximum load
Power consumption
Floor sensors supported
Control modes
2.4GHz
220-240V~50/60Hz
16A
Ambient temperature 0°C to 40°C (during operation)
<2W
Temperature range
0°C to 40°C
Hysteresis
0.5°C to 2°C (default 0.5°C)
IP rating
Relative humidity 8% to 80%
IP21
Control types Room sensor (factory default)
Floor sensor
Room + floor sensor
This parameter can also be configured through advance config parameter 10
1. Away 2. Auto 3. Manual 4. Drying 5. Off
Standard EN 60730-1:2016;A1, EN IEC 60730-2-9:2019;A1
EN IEC 61000-3-2:2019, EN 61000-3-3:2013+A1:2019,
EN 60730-1:2016+A1:2019,
EN 60730-2-19:2019+A1:2019+A2:2020,
EN 50663:2017;ETSI EN 301 489-1V2.2.3,
ETSI EN301 489-3V2.1.1 ETSI EN300 220-1 v3.1.1.,
ETSI EN300 220-2 V3.2.1
RED:2014/53/EU
Certificate ZigBee 3.0, CE, RED
NTC R25=10K±1%@25°C, B25/50=3950K±1% (factory setting)
NTC R25=15K±1%@25°C, B25/50=3950K±1%
NTC R25=12K±1%@25°C，B25/50=3950K±1%）
NTC R25=50K±1%@25°C, B25/50=3950K±1%
NTC R25=100K±1%@25°C, B25/50=3950K±1%
Floor sensor
NTC R25=10K±1%@25°C, B25/50=3950K±1%, (3m included)
81mm
81mm
21.3mm28.4mm