Need help?Do you have a question about the Nanni N2.10 and is the answer not in the manual?
Explains the meaning of various safety alert symbols used in the manual.
Identifies and explains safety stickers affixed directly on the engine.
Details hazards of exhaust gas, symptoms of carbon monoxide intoxication, and checks.
Warns about touching hot engine parts and handling hot fluids.
Covers fuel vapor explosion risks, handling, storage, and refueling precautions.
Details risks of electrocution, safe practices, and shore power connections.
Explains the dangers of battery acid and necessary precautions.
Covers risks associated with battery hydrogen gas and explosion prevention.
Warns about the dangers of rotating engine parts and appropriate attire.
Details risks of accidental engine starting and necessary safety measures.
Explains risks of water ingress, causes, and consequences for the engine.
Details the oil pressure gauge and the alarm for low oil pressure.
Details the coolant temperature gauge and the alarm for high temperature.
Explains warning lamps for Coolant Temperature and Battery Charge.
Details the warning lamp and alarm for low engine oil pressure.
Explains the warning lamp and alarm for water in the fuel filter.
Lists all necessary checks and operations before starting the engine.
Provides instructions for starting the engine, including safety warnings.
Step-by-step guide to starting the engine using a panel with a key switch.
Step-by-step guide to starting the engine using a panel without a key switch.
Provides guidance on checking instruments and operating the engine.
Explains safe procedures for forward and reverse maneuvering.
Provides instructions and precautions for safely stopping the engine.
Outlines required maintenance tasks based on operating hours and time intervals.
Lists essential checks to perform before each engine operation.
Details maintenance tasks required every 100 operating hours or annually.
Lists probable causes for the engine not starting.
Lists probable causes for the engine stopping immediately after starting.
Lists probable causes for difficulty in starting the engine.
Lists probable causes for a slow or non-operational starter motor.
Lists probable causes when the starter motor engages but the engine doesn't run.
Lists probable causes for not reaching rated engine speed at full throttle.
Lists probable causes for irregular engine running.
Lists probable causes for engine overheating or high coolant temperature.
Lists probable causes for the battery charge warning lamp being illuminated.
To Next Page
General
