EasyManuals Logo

Nanni N2.14 User Manual

Nanni N2.14
68 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #25 background imageLoading...
Page #25 background image
Warning lamps
COOLANT TEMPERATURE
This warning lamp comes on and
the alarm sounds when the coolant
temperature is too high.
I DANGER
Never open the coolant filler cap
or any plug of the cooling system
when the engine is warm. Steam
or hot fluid can spray out.
I CAUTION
If this alarm comes on while
the engine is running, stop the
engine, except in extreme emer-
gencies, and check the coolant
level, the belt condition, the raw
water filter condition, and that
the sea cock is open.
Operating the engine while
the coolant temperature is too
high can lead to severe engine
damage. Do not operate the
engine if the problem persists
and contact a Nanni workshop
as soon as possible.
BATTERY CHARGE
This warning lamp comes on when
the system voltage is connected.
If this lamp lights up when the
engine is running, it indicates that
the alternator of the engine is not
charging.
The cause can be a fault in the
electrical system or because the
alternator belt is slack.
I CAUTION
If this alarm comes on while
operating the engine, stop the
engine, except in extreme emer-
gencies, and check components
of the belt system. Also check
components of the electrical
system (fuses, battery, etc).
Do not operate the engine if
the problem persist and contact
a Nanni workshop as soon as
possible.
22

Other manuals for Nanni N2.14

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Nanni N2.14 and is the answer not in the manual?

Nanni N2.14 Specifications

General IconGeneral
BrandNanni
ModelN2.14
CategoryEngine
LanguageEnglish

Related product manuals