Need help?Do you have a question about the Nanni T4.200 and is the answer not in the manual?
Details about fuel injection system components and specifications.
Information on engine oil type, pressure, and capacity.
Details on coolant type and capacity.
Specifications for battery and alternator.
Information on fuel and exhaust connection sizes.
Procedure for checking and topping up engine oil.
Steps for draining and refilling engine oil.
Instructions for inspecting and cleaning the air filter.
Procedure for replacing the fuel filter cartridge.
Information on checking and replacing the zinc anode.
Steps for inspecting and checking the alternator belt.
Procedure for replacing the impeller in the seawater pump.
Guidance on checking and topping up engine coolant.
Requirements for engine room temperature and ventilation.
Details on fuel tank placement, pump, and piping.
Importance of correct electrical installation for corrosion prevention.
Information on the 12V auxiliary output on instrument panels.
Explains the oil pressure gauge and warning light function.
Explains the coolant temperature gauge and warning light.
Indicates a fault in the alternator if it stays on while running.
Indicates spark plugs are pre-heating combustion chambers.
Alerts when there is excessive water in the diesel filter.
Indicates excessive air pressure in the turbocharger.
Signals a failure in the engine's electronic system.
Steps for starting and stopping the engine using specific panels.
General| Engine Type | 4-stroke diesel |
|---|---|
| Displacement | 4.485 L (273.7 cu in) |
| Fuel Type | Diesel |
| Cooling System | Liquid Cooled |
| Weight | 540 kg (1190 lbs) |
| Cylinders | 4 |
| Power Output | 200 HP |
To Next Page
