Need help?Do you have a question about the Nanni 4.380 TDI and is the answer not in the manual?
Symbols indicating danger levels and precautions for safe engine operation.
General safety rules and precautions for engine operation and maintenance.
Guidelines for personal protective equipment when working with the engine.
Precautions for handling fuels and lubricants to prevent hazards.
Warning about the toxicity and accumulation of engine exhaust gases.
Caution regarding pressure in cooling and oil systems when opening caps.
Safety precautions related to the engine battery, including handling and short-circuiting.
Safety advice for electrical system checks, wiring, and repairs.
Environmental regulations and precautions for the disposal of engine fluids.
Information on NANNI DIESEL engine quality and the importance of proper installation.
Explanation of the content and purpose of the operating instructions manual.
List and identification of key engine components with corresponding numbers.
Essential checks to perform on the engine before delivery.
Step-by-step instructions for checking and adding engine oil.
Description of the fuel system components and initial checks.
Procedure for bleeding air from the fuel system after initial setup.
Explanation of the engine's closed and sea water cooling systems.
Guidelines for preparing and using coolant fluid and system flushing.
Recommendation for fitting and cleaning the sea water filter.
Overview and checks for engine electrical components like battery and alternator.
Step-by-step procedure for safely starting the engine.
Correct procedure for shutting down the engine.
Recommendations for engine break-in period and warranty service requirements.
Procedure for valve clearance adjustment.
Steps for replacing the seawater pump impeller.
Maintenance checks for electrical components like alternator and battery.
Battery maintenance, including electrolyte level and density checks.
Procedure for replacing the fuel filter cartridge.
Process for replacing fuel injectors, including testing.
Steps for changing the engine oil and oil filter.
Procedure for replacing the engine oil filter.
Checks for remote control cable stroke and lever operation.
List of recommended spare parts for engine maintenance.
To Next Page
General
