EasyManua.ls Logo

Nanni 4.390 TDI - User Manual

Nanni 4.390 TDI
13 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Notice de conduite
Instruction manual
Manuale d'istruzione
Betriebsanleitung
Instructieboek
Manuale de instrucciones
Instruksjonbok
Käyttöohje
P/N 970 312 832 2004-10

Other manuals for Nanni 4.390 TDI

Question and Answer IconNeed help?

Do you have a question about the Nanni 4.390 TDI and is the answer not in the manual?

Summary

Safety Information

Safety Symbols

Explains visual indicators for hazards and precautions.

Safety Recommendations

Outlines essential safety practices and procedures for operation.

Protective Clothing

Advises on wearing appropriate safety gear to prevent injury.

Fuels and Lubricants Handling

Details safe practices for refueling and lubrication.

Engine Exhaust Safety

Warns about the toxic nature of exhaust gases and ventilation needs.

System Pressure Precautions

Highlights risks associated with system pressure and cap removal.

General Information

Product Quality & Engineering

Describes the engine's design, materials, and manufacturing standards.

Installation & Operation Importance

Stresses the significance of correct installation and manual adherence.

Engine Identification

Explains how to find and use engine model and serial numbers for correspondence.

Identification of Main Parts

Lists and illustrates key engine components for reference.

Pre-Delivery Service

General Verification Checks

Checks to perform before initial engine use and during installation.

Engine & Gearbox Lubrication

Provides guidance on lubricating the engine and transmission.

Adding Motor Oil

Details the procedure for checking and replenishing engine oil levels.

Fuel System

Describes the components and function of the engine's fuel system.

Fuel System Bleeding Procedure

Outlines the steps to purge air from the fuel system.

Cooling System Description

Explains the two systems: closed cooling and sea water circulation.

Engine Operation

Starting the Engine

Provides a step-by-step guide for safely starting the engine.

Stopping the Engine

Details the procedure for correctly shutting down the engine.

Engine Run-In & Guarantee Visits

Covers break-in periods and mandatory warranty service requirements.

Maintenance

Valves Adjustments

Instructions for performing valve clearance adjustments by a specialist.

Seawater Pump Impeller Replacement

Step-by-step guide for replacing the seawater pump impeller.

Electrical Equipment Maintenance

Routine checks for alternator belt tension and electrical connections.

Battery Maintenance

Guidelines for checking battery condition, electrolyte level, and density.

Cooling System Rinsing

Procedure for flushing the cooling system with fresh water.

Draining Sea Water System

Steps to completely drain the sea water circuit.

Heat Exchanger Tube Stack Check

Instructions for inspecting and cleaning the heat exchanger tube stack.

Fuel Filter Cartridge Replacement

Guide for replacing the disposable fuel filter cartridge.

Fuel Injectors Replacement

Details on removing, replacing, and testing fuel injectors.

Engine Oil Change Procedure

Steps for draining old oil and refilling with new oil.

Oil Filter Replacement

Instructions for replacing the engine oil filter cartridge.

Reversing Gearbox Reference

Refers to the gearbox manual for detailed instructions.

Reversing Gearbox Control System

Guidance on checking remote controls and cable stroke.

Technical Specifications

Engine Specifications

Presents detailed technical data for T4.155, 4.380TDI, and 4.390TDI models.

Recommended On-board Repair Kit

Lists essential parts and their part numbers for a repair kit.

Nanni 4.390 TDI Specifications

General IconGeneral
BrandNanni
Model4.390 TDI
CategoryEngine
LanguageEnglish

Related product manuals