Need help?Do you have a question about the Nanni QMS 32T and is the answer not in the manual?
Overview of general safety warnings, icons and precautions for operating the generating set.
Details on risks associated with electricity and required protective measures.
Information on preventing fire and explosion hazards related to the generating set.
Guidance on avoiding burns from hot parts and injuries from pressurized fluids.
Warning about carbon monoxide poisoning from exhaust fumes.
Precautions against lethal voltages at electrical connectors and during maintenance.
Measures to prevent fires and explosions from fuel vapors and ignition sources.
Dangers of accidental starting and risks associated with battery handling and explosion.
Hazards of battery acid and serious injury risks from rotating engine parts.
Guidelines for safely lifting the generating set and general maintenance advice.
Ensuring correct fuel quality and avoiding contamination for optimal engine performance.
Nanni Diesel's commitment to environmental impact and user responsibilities.
List of critical spare parts recommended for emergency repairs.
Details on location and importance of engine and generator identification plates.
Essential checks before initial operation and commissioning of the generating set.
Identification of the engine alternator and its drive belt.
Locating the starter motor and the heat exchanger on the generating set.
Identifying the coolant fill orifice and coolant pump.
Locating the seawater pump and the exhaust elbow.
Identifying the air filter and the engine oil fill orifice.
Locating the oil filter and the optional oil drain pump.
Identifying the oil gauge and the fuel filter.
Locating the fuel pump and the generator set supports.
Identifying the generator and its identification plate.
Locating the designated points for lifting the generating set.
Identification of the engine alternator and its drive belt.
Locating the starter motor and the heat exchanger on the generating set.
Identifying the coolant fill orifice and coolant pump.
Locating the seawater pump and the exhaust elbow.
Identifying the air filter and the engine oil fill orifice.
Locating the oil filter and the optional oil drain pump.
Identifying the oil gauge and the fuel filter.
Locating the fuel pump, turbocharger, and generator set supports.
Identifying the generator and its identification plate.
Locating the designated points for lifting the generating set.
Explanation of the various indicator lights on the instrument panel.
Details on the start and stop buttons for operating the generating set.
Monitoring coolant temperature and oil pressure via the instrument panel.
Function of the indicator for water presence in the fuel filter.
Key electrical performance data including power, voltage, and current.
Details on engine capacity, bore, stroke, speed, and weight.
Information on combustion principle, intake, injectors, and fuel type.
Data on oil pressure, type, grade, and capacity for lubrication.
Details on coolant capacity, type, and mixture for the cooling system.
Specifications for valve clearance, glow plug resistance, alternator, and battery.
Essential checks and preparation steps before starting the generating set.
Step-by-step guide for safely starting the generating set using the instrument panel.
Regularly monitoring indicators and alarms while the set is running.
Procedures for normal stopping and emergency stop of the generating set.
Actions to take after the engine has stopped, including safety checks.
Ensuring reliability and service life through regular maintenance.
Guidance on selecting and using appropriate fuel and lubricants.
Instructions for maintaining the cooling system with correct coolant mixtures.
Routine checks to perform before and after each use of the generating set.
Procedures for cleaning or replacing the air filter.
Maintaining total cleanliness in the fuel circuit to prevent impurity entry.
Procedure for removing air from the fuel circuit after filter changes or fuel depletion.
Steps for replacing the fuel filter and optional prefilter.
Method for draining water and impurities from the fuel prefilter.
Instructions for accurately checking the engine oil level.
Procedure for safely draining and replacing engine oil.
Steps for removing and installing a new oil filter cartridge.
Explanation of the cooling system's function and coolant requirements.
Procedure for draining and cleaning the engine's coolant circuit.
Steps for safely refilling the cooling system with new coolant.
Safety measures when working on the seawater circuit, especially below the waterline.
Procedure for cleaning the optional seawater filter.
Steps for draining and rinsing the seawater circuit.
Procedure for replacing the seawater pump rotor and seal.
Instructions for checking and adjusting the alternator belt tension and condition.
Procedure for checking and maintaining the battery's electrolyte level.
Recommended steps for protecting the generating set during long periods of non-use.
Procedures to follow before restarting the generating set after a storage period.
Recommendations for positioning and mounting the generating set for optimal performance.
Ensuring adequate ventilation for the engine compartment to prevent overheating.
Guidelines for safe electrical connections and fuel feed system setup.
Specific requirements for installing the seawater cooling system and exhaust.
Common faults and solutions when the engine fails to start or the starter does not engage.
Identifies common causes for engine overheating and their respective solutions.
General| Brand | Nanni |
|---|---|
| Model | QMS 32T |
| Category | Portable Generator |
| Language | English |
To Next Page
