how to
clean your
device
After removing your Nano CIC from your ear, take the
ear dome out of the device.
Gently use brush or an alcohol wipe to remove the ear
wax on your device, especially on the area covered by
the dome.
If necessary, change the waxguard(s). (Check page 22)
Clean the ear dome verifying there is no wax buildup or
debris covering its hole, you can clean it with warm water
and soft soap and gently massage the dome until it’s
free of wax - always remove the domes from the device.
Clean with a dry wipe and let the device dry. Install the
eardome.
1
2
3
4
5
24
To Next Page
Loading...
