Table of Contents
Introduction
Credits
Relationship to the NanoVNA
Specifications
VNA basics
Menu map
User interface
Main screen
Menu screen
Keypad screen
Device settings
Performing measurements
Setting the measurement frequency
range
Calibration
Trace display
Markers
Time domain operation
Recall calibration and settings
NanoVNA-QT Software
User interface
Connecting to the device
Setting sweep range and
parameters
Calibration
Firmware Update
Appendix I – Hardware architecture
Appendix II – USB data interface
Protocol description
Host to device command list
Register descriptions
Register descriptions (DFU mode)
To Next Page
Loading...